While studying at Flinders University, I helped run a couple of clubs, and did some graphic design work for these clubs. This ranged across digitial designs (e.g. logos, social media, TV slides, event posters, etc.), physical branding (vinyl banners, decals, stickers, coreflute signage, etc.) and merchandise (embroidery, screen printing, and POD merch), as well as other bits and pieces (like painting a mural).
This site holds a collection of various works I've made. The designs here are displayed in no particular order, and you can click on each to view a brief blurb of info (once you click on one you can also use the arrows to step through them all in order).
The two clubs I made these designs for were the Flinders Academic Science Club (FLASC) and the Flinders University Computer Society (FUCS).
© Alex Priest, FLASC, & FUCS
A banner design made for hallways around campus
2.4m x 0.8m
Designed in Inkscape & Krita
Printed by Elite Printing Studio, Adelaide
A copy of our banner, on permanent display outside lecture theatures South 1+2
2.4m x 0.8m
Designed in Inkscape & Krita
Printed by Elite Printing Studio, Adelaide
A copy of our banner, on permanent display in level 3 of the Physical Sciences building
2.4m x 0.8m
Designed in Inkscape & Krita
Printed by Elite Printing Studio, Adelaide
Prior design. The club rebranded from Thinking CaPS to FLASC. The new banner design (made by me) was based upon this design (made by others).
A set of computing-related icons designed to be used in logos, cover photos, slide backgrounds, etc.
The insects represent bugs in code, e.g. for any debugging-related events.
Designed in Inkscape
Circular 25cm decals placed in the centre of five tables outside the club's common room
Designed in Inkscape
Printed by Elite Printing Studio, Adelaide
Circular 25cm decals placed in the centre of five tables outside the club's common room
Designed in Inkscape
Printed by Elite Printing Studio, Adelaide
An updated design for stickers used to label books and other club assets
Designed in Inkscape & Krita
Printed by Moo Printing
Prior design. The club rebranded from Thinking CaPS to FLASC. The new sticker design (made by me) was very loosely based upon this design (made by others).
An updated design for a pull-up banner displayed at club events
Designed in Inkscape & Krita
Printed by Officeworks
Prior design. The club rebranded from Thinking CaPS to FLASC. The new banner design (made by me) was based upon this design (made by others).
Laminated posters displayed on an ongoing basis around campus (A4 and A3, cropped to a square)
Designed in Inkscape
Laminated posters displayed on an ongoing basis around campus (A4 size)
The 'things you might be interested in' and designs shown behind each one were copied from a previous Facebook banner made by the club (before the club rebranded from Thinking CaPS to FLASC)
Designed in Inkscape
Design to be sent to the embroidery company.
This was a reworked version of our existing blue logo above, with rainbow colours and bubbles added (the rainbow palette was copied from a previous event).
After this point, the rainbow logo and colour scheme were used in various other places, e.g. quiz nights, further merch, etc.
Designed in Inkscape and embroidered by Topline Promotions, Adelaide
A mockup made before sending the design to the embroidery company
Designed in Inkscape & Paint.NET
Embroidered by Topline Promotions, Adelaide
Resulting merch produced by the embroidery company. Other club execs designed the white jumpers/hoodies, while I designed the black jumpers/hoodies and organised embroidery of both
Designed in Inkscape & Paint.NET
Embroided by Topline Promotions, Adelaide
New business cards to be used by club executives
People could write their personal email/details in the blank area on the back
Originally printed with a white back, however the ink from the front of each card rubbed onto the back of the next, so this was replaced with a blue back
Designed in Inkscape
Printed by VistaPrint
New business cards to be used by club executives
People could write their personal email/details in the blank area on the back
Originally printed with a white back, however the ink from the front of each card rubbed onto the back of the next, so this was replaced with a blue back
Designed in Inkscape
Printed by VistaPrint
A team of volunteers from the club (led by myself) painted a mural on a large concrete cylinder outside our common room. We mostly use the club's brand colours, blue and white. Painting was performed over 3 days on a long weekend, with additional coats completed afterwards.
A team of volunteers from the club (led by myself) painted a mural on a large concrete cylinder outside our common room. We mostly use the club's brand colours, blue and white. Painting was performed over 3 days on a long weekend, with additional coats completed afterwards.
A team of volunteers from the club (led by myself) painted a mural on a large concrete cylinder outside our common room. We mostly use the club's brand colours, blue and white. Painting was performed over 3 days on a long weekend, with additional coats completed afterwards.
A team of volunteers from the club (led by myself) painted a mural on a large concrete cylinder outside our common room. We mostly use the club's brand colours, blue and white. Painting was performed over 3 days on a long weekend, with additional coats completed afterwards.
A team of volunteers from the club (led by myself) painted a mural on a large concrete cylinder outside our common room. We mostly use the club's brand colours, blue and white. Painting was performed over 3 days on a long weekend, with additional coats completed afterwards.
A team of volunteers from the club (led by myself) painted a mural on a large concrete cylinder outside our common room. We mostly use the club's brand colours, blue and white. Painting was performed over 3 days on a long weekend, with additional coats completed afterwards.
A 3D print for a science demonstration based on
The demonstration has so far been unsuccessful, as I couldn't find a product to purchase in Australia as lighter fluid with exactly the right combustion properties
Designed in OpenSCAD & Inkscape
3D printed by the university
A map of the university's South Ridge precinct, put on display at a specific location (shown) as students entered South Ridge.
The map had two purposes – helping students navigate South Ridge, and showing how to get to the club common room. So far it's been on display for more than a year.
Designed in Inkscape
Printed by Officeworks
A map of the university's South Ridge precinct, put on display at a specific location (shown) as students entered South Ridge.
The map had two purposes – helping students navigate South Ridge, and showing how to get to the club common room. So far it's been on display for more than a year.
Designed in Inkscape
Printed by Officeworks
A map of the university's South Ridge precinct, put on display at a specific location (shown) as students entered South Ridge.
The map had two purposes – helping students navigate South Ridge, and showing how to get to the club common room. So far it's been on display for more than a year.
Designed in Inkscape
Printed by Officeworks
A new logo for the club. The computer monitor idea from the previous logo was reused, while everything else was brand new. The club later switched to a different colour scheme after publishing this logo, and published a recoloured version instead
Designed in Inkscape
A new facebook banner for the club. The club later switched to a different colour scheme after publishing this banner, and published a recoloured version instead
Designed in Inkscape
TV slide (animated) to advertise the event
Low-res, low-framerate GIF shown here
Designed in Inkscape & HTML/CSS
Trivia card (front side). 250x handed out to advertise the event
Designed in Inkscape
Printed by VistaPrint
Trivia card (reverse side). 250x handed out to advertise the event
Designed in Inkscape
Printed by VistaPrint
TV slide (non-animated) to advertise the event
Designed in Canva
TV slide (animated) to advertise the event
Low-res, low-framerate GIF shown here
Designed in Inkscape & HTML/CSS
Trivia card (front side). 500x handed out to advertise the event
Designed in Inkscape
Printed by VistaPrint
Trivia card (reverse side). 500x handed out to advertise the event
Designed in Inkscape
Printed by VistaPrint
Instagram post (part 1 of 2) to advertise the event
Designed in Canva
Instagram post (part 2 of 2) to advertise the event
Designed in Canva
Stickers for people to put on their student ID cards when joining FLASC
Designed in 2024 for multiple years
Designed in Inkscape
Printed by Moo Printing
Stickers for people to put on their student ID cards when joining FLASC
Designed in 2024 for multiple years
Designed in Inkscape
Printed by Moo Printing
Stickers for people to put on their student ID cards when joining FLASC
Designed in 2024 for multiple years
Designed in Inkscape
Printed by Moo Printing
Stickers to be included (1) in books of stickers used by the club (e.g. to label club assets) and (2) in books of stickers sold as merch
Designed in Inkscape
Printed by Moo Printing
Stickers to be included (1) in books of stickers used by the club (e.g. to label club assets) and (2) in books of stickers sold as merch
Designed in Inkscape
Printed by Moo Printing
Stickers to be included (1) in books of stickers used by the club (e.g. to label club assets) and (2) in books of stickers sold as merch
Designed in Inkscape
Printed by Moo Printing
Sticker books. People could purchase a page of 6 stickers, spelling out 'FLASC' or 'Flinders' using periodic table elements
Designed in Inkscape
Printed by Moo Printing
Sticker books. People could purchase a page of 6 stickers, spelling out 'FLASC' or 'Flinders' using periodic table elements
Designed in Inkscape
Printed by Moo Printing
Sticker books. People could purchase a page of 6 stickers, spelling out 'FLASC' or 'Flinders' using periodic table elements
Designed in Inkscape
Printed by Moo Printing
Sticker books. People could purchase a page of 6 stickers, spelling out 'FLASC' or 'Flinders' using periodic table elements
Designed in Inkscape
Printed by Moo Printing
An A4 periodic table, handed out to students during O'Week/etc
Designed to compress as much useful information into one sheet as possible
Designed in Word
An A4 map of evolution, handed out to students during O'Week/etc
Designed to compress as much useful information into one sheet as possible
All data was sourced from Kurzgesagt's existing Map of Evolution poster
Designed in Word
Instagram post (part 1 of 7) to advertise the event
Made in Inkscape
Instagram post (part 2 of 7) to advertise the event
Made in Inkscape
Instagram post (part 3 of 7) to advertise the event
Made in Inkscape
Instagram post (part 4 of 7) to advertise the event
Made in Inkscape
Instagram post (part 5 of 7) to advertise the event
Made in Inkscape
Instagram post (part 6 of 7) to advertise the event
Made in Inkscape
Instagram post (part 7 of 7) to advertise the event
Made in Inkscape
Instagram post to announce the route
Made in Inkscape
Instagram post to announce an updated route (nicely enough this received more engagement than the initial route announcement!)
Made in Inkscape
Temporary instagram profile picture for the club in the lead-up to the event
Made in Inkscape
Cryptic posters placed around campus to advertise the event
Made in Inkscape
Retro-reflective tank tops made for the event (torch OFF)
Five tops were hand-dyed, then reflective tape was cut with a scalpel and ironed on
Retro-reflective tank tops made for the event (torch ON)
Five tops were hand-dyed, then reflective tape was cut with a scalpel and ironed on
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
The periodic table of brat: A joke version of the club's existing periodic table, used to advertise the event. The brat elements are mostly toxic, radioactive or explosive, but the choices were arbitrary
Made in Word
A logo for a 'Flinders Science' discord server, covering chemistry, physics, biology, and more.
The science department at Flinders is centred around a courtyard known as Anchor Court, which has a big anchor in the middle, so I used that idea for the logo, rather than favouring any one discipline or trying to display all disciplines at once.
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Merch sold via
Designed in Inkscape
Poster to advertise the event
Designed in Canva
TV slide to advertise the event
Designed in Canva
Drinks tokens handed to guests as part of a sponsorship deal
Designed in Canva
Instagram post announcing a sponsorship deal, and showing the drinks tokens that would be handed to guests
Instagram post (part 1 of 4) to announce the event
Designed in Canva
Instagram post (part 2 of 4) to announce the event
Designed in Canva
Instagram post (part 3 of 4) to announce the event
Designed in Canva
Instagram post (part 4 of 4) to announce the event
Designed in Canva
Instagram post announcing a best-dressed competition (details were described in the caption, and the prizes were two sashes with the writing shown)
Instagram post designed in Canva
Sashes printed by 2Bling Craft Supply Store, Sydney West (via Ebay)
Instagram post calling for song requests
Designed in Canva
Instagram post announcing the drinks menu
Designed in Canva
Instragram post (part 1 of 4) to announce the event
Designed in Canva
Instragram post (part 2 of 4) to announce the event
Designed in Canva
Instragram post (part 3 of 4) to announce the event
Designed in Canva
Instragram post (part 4 of 4) to announce the event
Designed in Canva
Instragram post calling for song requests
Designed in Canva
Instragram post announcing when ticket sales opened
Designed in Canva
Instragram post (part 1 of 10) to announce a best-dressed competition and show some photos from previous balls as outfit inspiration (parts 4-10 — omitted here)
Designed in Canva
Instragram post (part 2 of 10) to announce a best-dressed competition and show some photos from previous balls as outfit inspiration (parts 4-10 — omitted here)
Designed in Canva
Instragram post (part 3 of 10) to announce a best-dressed competition and show some photos from previous balls as outfit inspiration (parts 4-10 — omitted here)
Designed in Canva
Poster to advertise the event
Designed in Canva
TV slide to advertise the event
Designed in Canva
Drinks tokens given to guests who bought a non-alcoholic ticket (they could have 3x mocktails + soft drinks + juices)
Designed in Canva
Slides displayed on TVs around campus to let students know about FLASC and various programs run by FLASC
An earlier revision of this slide was designed by other club executives in Canva
Made in Powerpoint
Slides displayed on TVs around campus to let students know about FLASC and various programs run by FLASC
Made in Powerpoint
Slides displayed on TVs around campus to let students know about FLASC and various programs run by FLASC
Made in Powerpoint
Slides displayed on TVs around campus to let students know about FLASC and various programs run by FLASC
Made in Powerpoint
Slides displayed on TVs around campus to let students know about FLASC and various programs run by FLASC
Made in Powerpoint
Slides displayed on TVs around campus to let students know about FLASC and various programs run by FLASC
Made in Powerpoint
Slides displayed on TVs around campus to let students know about FLASC and various programs run by FLASC
Made in Powerpoint
Decorating our common room door as part of a competition for christmas
Made in Word
TV slide to adverstise a study session. The computer character/mascot was made previously by other club execs.
Designed in Inkscape & Canva
Poster to adverstise a study session
Designed in Inkscape & Canva
Social media post to adverstise a study session
Designed in Inkscape & Canva
Shirt design for the pub crawl (blue shirts for regular attendees). The design was based on a rough sketch by the club president.
Designed in Inkscape
Screen-printed by Topline Promotions
Shirt design for the pub crawl (yellow shirts for club execs). The design was based on a rough sketch by the club president.
Designed in Inkscape
Screen-printed by Topline Promotions
Social media post to announce the event
Designed in Inkscape
Social media post to announce the route
Designed in Inkscape
Poster to advertise the event
Designed in Inkscape
Slide to advertise the event
Designed in Inkscape
Facebook event cover photo
Designed in Inkscape
TV slide to advertise the event
Made in Canva from components prepared in Inkscape
Social media post to announce the event (part 1 of 6)
Made in Canva from components prepared in Inkscape
Social media post to announce the event (part 2 of 6)
Made in Canva from components prepared in Inkscape
Social media post to announce the event (part 3 of 6)
Made in Canva from components prepared in Inkscape
Social media post to announce the event (part 4 of 6)
Made in Canva from components prepared in Inkscape
Social media post to announce the event (part 5 of 6)
Made in Canva from components prepared in Inkscape
Social media post to announce the event (part 6 of 6)
Made in Canva from components prepared in Inkscape
Blank name badges for tutors
Made in Canva from components prepared in Inkscape
Blank name badges for organisers
Made in Canva from components prepared in Inkscape
Blank poster template to advertise SWOTVAC Study Sessions each year/semester
Made in Canva from components prepared in Inkscape
Sign to direct chem students to one table
Made in Canva from components prepared in Inkscape
Sign to direct bio students to one table
Made in Canva from components prepared in Inkscape
Sign to direct physics students to one table
Made in Canva from components prepared in Inkscape
Floor dots (40cm) leading the way to the club common room. These were based on the dots leading to our old room (indoors). However, they were ultimately abandoned before printing, once the uni decided that outdoor floor-dots would wear out too quickly (our new room had an outdoor entrance).
Designed in Canva & Krita
Floor dots (40cm) leading the way to the club common room. These were based on the dots leading to our old room (indoors). However, they were ultimately abandoned before printing, once the uni decided that outdoor floor-dots would wear out too quickly (our new room had an outdoor entrance).
Designed in Canva & Krita
Floor dots (40cm) leading the way to the club common room. These were based on the dots leading to our old room (indoors). However, they were ultimately abandoned before printing, once the uni decided that outdoor floor-dots would wear out too quickly (our new room had an outdoor entrance).
Designed in Canva & Krita
Prior design. The club rebranded from Thinking CaPS to FLASC, and moved to a new common room. The new floor dot design (made by me) was based upon this design (made by others).
Coreflute banner to hang above the club's stall at O'Week and similar events.
Designed in Canva
Printed by EasySigns, NSW
Coreflute banner to hang above the club's stall at O'Week and similar events.
Designed in Inkscape
Printed by EasySigns, NSW